7.5 Ton Hand Chain Hoist Sent To Singapore

7.5 ton Hand Chain Hoist sent to Singapore
 

15 sets
 

7.5 tons
 

3m
 

Hand-chain chain hoists are suitable for short-distance lifting of small equipment and goods. The lifting capacity generally does not exceed 10T, the largest can reach 20T, and the lifting height generally does not exceed 6m. The shell of the chain hoist is made of high-quality alloy steel, which is strong and wear-resistant, and has high safety performance.
 

1. Before operating the chain hoist, each component and part must be checked in detail, including each link of the chain, and it can only be used when it is in good condition.

2. The hand chain hoist must not be overloaded during use.

3. The chain hoist lifting chain requires vertical suspension of heavy objects. There must be no wrong buttons between each link of the chain.

4. When the hand chain hoist pulls the hand zipper, the direction of the zipper must be on the same plane as the hand chain wheel.

5. It is strictly forbidden to pull diagonally to prevent the chain from being stuck.

6. When pulling, you must use steady force to avoid jumping or jamming the chain; when you find that pulling is difficult, check the cause in time, do not pull hard, let alone increase force, so as not to break the chain or pin.

7. When using a tripod, the triangle must maintain a relative distance, and the two feet should be connected by a rope. When the connection rope is on the ground, care should be taken to prevent the operator from falling over.

8. The lifting height must not exceed the standard value to prevent the chain from breaking the pin and causing an accident. Attention should be paid to the above details to avoid unnecessary troubles, so as to ensure high operation safety.